10 Best Bench Vise Made in Usa – Review and Buying Guied

Our 10 Best Bench Vise Made in Usa : Editor Recommended

10 Best Bench Vise Made in Usa Review :

1. FRICTIONWORKS Premium Vise Jaws 6″ Made in USA .

FRICTIONWORKS Premium Vise Jaws 6' Made in USA -...
4 Reviews
FRICTIONWORKS Premium Vise Jaws 6" Made in USA -...
  • MADE IN THE USA - The vise jaw reengineered from the ground up and...
  • 12 N48 SPEC MAGNETS - 7 lbs of force each keep jaws solidly on the...
  • NO FAIL DESIGN - Magnets secured with stainless screws and recently...
  • ENHANCED MATERIAL - Our proprietary reinforced polymer composite with...

1 pair Frictionworks RAD 6-Inch Vise Jaws Medium Shore hardness .Proprietary reinforced polyurethane composite .Heavy Duty Construction Made in USA .

At Frictionworks we have perfected a proprietary polymer composite with approximate shore hardness 60 giving a perfect balance of grip and toughness without the slick hard face of nylon with approximate shore hardness of 80.

We have eliminated the failure points found in almost all magnetic bench vise soft jaws: Jaws won’t stay put on the vise due to weak undersized low quality rare earth magnets. Magnets come out of the vise because they are only glued in round, or worse, elliptical holes. Magnets are set crooked in the jaws further reducing hold.

Frictionworks soft jaws use 1/2 inch N48 spec magnets with 7 lbs of force each! Nothing comes close. Magnets are both screwed and bonded with commercial-grade epoxy. Round, not elliptical holes, provide maximum surface contact for bonding.  

RAD Vise Jaws have a true 90-degree angle that ensures a secure no wobble fit. Accurate dimensions enable fit to a wide variety of machine vises. Magnet polarities always line up so they stay stacked for storage. Thicker walls allow over-sized magnets and a more consistent compression profile improving hold to the vise and the work piece.

The proprietary polyurethane blend with specially textured surface is slightly softer than nylon, reducing slippage and improving grip and protection. Will not discolor or leave markings. Use for gunsmithing, chrome, aluminum, 80/20 extrusions, fishing lures, fishing rods, plastic, wood, jewelry, and more. Optimized for low and mid-torque usage. Very high torque, esp with rounded items can flex the jaws and break the bond to the magnets.

Product Highlights :

  1. The vise jaw reengineered from the ground up and built to a higher standard in the USA .
  2. 7 lbs of force each keep jaws solidly on the vise; Nothing else comes close .
  3. Magnets secured with stainless screws and recently upgraded commercial-grade epoxy .
  4. Our proprietary reinforced polymer composite with textured face Is incredibly tough yet softer and grippier than nylon while maintaining rigidity .
  5. with our custom polyurethane provide more uniform compression than other materials reducing slippage, vise slop and racking.
  6. Specially textured surface won’t mar, scratch or discolor. Tested on cerakote, chrome, aluminum, plastic, painted surfaces, and more .
  7. true flat surfaces, angles, and dimensions reduces wobble and improves fit and hold.

Package Dimensions : ‎6 x 1.22 x 1.22 inches
Item Weight : 6.5 ounces
Manufacturer : ‎Frictionworks
Date First Available : October 17, 2021

2. Yost Vises 5″ Heavy Duty Bench Vise, Double Swivel Rotating Vise.

Yost Vises 5' Heavy-Duty Bench Vise, Double Swivel...
1,122 Reviews
Yost Vises 5" Heavy-Duty Bench Vise, Double Swivel...
  • Casting Clamp force: 7,000 lbs. and Torque rating: 165 Ft-Lb
  • Durable Rotating head constructed in 60,000 PSI ductile iron,...
  • Jaw Width: 5" (12.7CM) x Jaw Opening: 4-7/8" (12.4CM) x Throat Depth:...
  • 360 degrees Rotating Head For Clamping Material At Any Angle

The Yost Vises 750-E is a multi-jaw rotating vise for Home & Industrial Use. Yost Vises 750E, 5” rotating bench vise is the ideal industry heavy duty vise. It can be used for home craftsman, in the workshop, and even used outdoors. If the vise is normally operated, it will last a lifetime.

Rotating jaws are made from 60,000 psi ductile iron and stationary body is made from 30,000 psi cast iron, this vise is designed for home workshops. For extra versatility in the shop, the head of the vise rotates a full 360 degrees. The side lock-down allows this vise to be clamped at any angle.

The base of the vise can also rotate 360 degrees, allowing for optimal work placement. The vise features three different sets of jaws for gripping parts: Machinist Jaws, Pipe Jaws and V-Jaws. Replaceable serrated jaws with microgroove tooth space are made from high strength steel for superior grip. The vise has four mounting holes to securely attach the vise to a workbench.

A large anvil work surface is located on the back of the vise. The vise features a 5” jaw width and 4-7/8” jaw opening. The bench vise painted with durable blue powder coat can be rotated up to 360-Degree on its base for work positioning.

The Yost 750-E is a multi-jaw rotating vise. Made from cast iron, this vise is designed for home workshops. For extra versatility in the shop, the head of the vise rotates a full 360 degrees. The side lock-down allows this vise to be clamped at any angle.

The base of the vise can also rotate 360 degrees, allowing for optimal work placement. The vise features three different sets of jaws for gripping parts: Machinist Jaws, Pipe Jaws and V-Jaws. The vise has four mounting holes to securely attach the vise to a workbench. A large anvil work surface is located on the back of the vise. The vise features a 4-7/8 inch jaw width and 4-7/8 inch jaw opening. Imported.

Product Highlights :

  1. Jaw Width: 5″ (12.7CM) x Jaw Opening: 4-7/8″ (12.4CM) x Throat Depth: 3″ (7.6CM) x Pipe Capacity: 0.5″D x 2.5″D (1.3 x 6.4CM).
  2. 360 degrees Rotating Head For Clamping Material At Any Angle.
  3. Large 3.2″ x 2.5” (8.1CM x 6.3CM) anvil work surface for flat shaping.
  4. 360-degree locking swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.
  5. Machined Q235 steel main screw 0. 74″D with rolled single acme threads at 4 threads per inch.
  6. Three (3) different sets of jaws for gripping parts: Machinist Jaws, Pipe Jaws and V-Jaws.
  7. 0.5″D x 7. 48″ Long handle.
  8. Base mounting tabs: (4) x 0.5″D, mounting hardware not included.

Package Dimensions : 18 x 9 x 9 inches
Item Weight : 34 pounds
Manufacturer : Yost Tools
Date First Available : January 20, 2015.

3. YOST VISES LV 4 Home Vise 4-1/2″ (1 Pack)” .

YOST VISES LV-4 Home Vise 4-1/2' (1 Pack)'
7,895 Reviews
YOST VISES LV-4 Home Vise 4-1/2" (1 Pack)"
  • Home Work Shop Vise, Woodworking, Assembly, General Maintenance
  • Jaw Width: 4-1/2" (11.4Cm) X Jaw Opening: 3" (7.6Cm) X Throat Depth:...
  • Holds 0. 6" D To 1. 85" D Pipes And Tubes (1. 5Cm X 4. 7Cm)
  • 30, 000 Psi Cast Iron Construction, Blue Power Coat Finish

The Yost Vises LV-4 is a 4-1/2-Inch swivel base vise is ideal for home shop. The vise is manufactured from cast iron featuring steel vise jaws, threaded spindle assembly and a chrome lockdown. The vise can be rotated up to 240-Degree on its base for work positioning. The built in pipe jaws allow holding small pipes and tubes ranging in diameter from 0. 6″D to 1. 85″D. The vise is painted with a durable blue powder coat.

Cast in place pipe jaws can grip round stock ranging from .6″ to 1.85″ in diameter. The machined serrated jaws are 4.5″ in width. The base features four mounting holes for mounting the vise to the workbench. The bolts are sold separately, but Yost recommends using 3/8″ bolts to mount the vise to the table. The improved base reduces side to side movement of the vise.
The zinc plated main screw uses an acme thread. The locking C collar provides quick engagement and disengagement of the main screw.

Product Highlights :

  1. Jaw width: 4-1/2″ (11.4CM) x Jaw opening: 3″ (7.6CM) x Throat depth: 2.4″ (6.1CM)
  2. Holds 0. 6″ D to 1. 85″ D pipes and tubes (1. 5CM x 4. 7CM)
  3. 30, 000 PSI cast iron construction, blue power coat finish
  4. Anvil: 1. 75” x 2” (4. 4CM x 5. 1CM)
  5. Screw Diameter: 0. 6” (1. 5CM), Handle Diameter: 0. 4” (1CM) x Handle Length 6” (15. 2CM)
  6. 240-Degree Swivel base allows rotating the vise for versatility.
  7. Swivel base features (4) mounting tabs
  8. Product Dimensions and Shipping weight: 9. 5” x 4. 5” x 5. 75” (3. 7CM x 1. 8CM x 2. 3CM) and 10. 7 pounds (4. 9Kgs)
  9. Installation hardware not included: (4) bolts 3/8” x table thickness.

Package Dimensions : 11 x 11 x 7.5 inches
Item Weight : 9 pounds
Manufacturer : Yost
Date First Available : June 29, 2015.

4. Yost Tools Vises 445 4.5″ Heavy-Duty Utility Combination Pipe and Bench Vise, Blue .

Sale
Yost Tools Vises 445 4.5' Heavy-Duty Utility...
907 Reviews
Yost Tools Vises 445 4.5" Heavy-Duty Utility...
  • Clamp force: 3, 150 lbs. and Torque rating: 73 Ft-Lb
  • Jaw Width: 4. 5" x Jaw Opening: 4" x Throat Depth: 2. 62"
  • Pipe Capacity: 1/8" x 2" Diameter, pipe jaws are cast-in place
  • 360-degree swivel base with (2) lock downs adjusts the direction of...

The Yost Apprentice Series of bench vises are designed for rugged applications. These vises are constructed from a combination of cast iron and steel. This allows the vises to handle higher clamping pressures than standard cast iron vises.

The Yost Vises Apprentice series utility combination pipe and bench vise has a 360-degree swivel base and mounts to a workbench to provide clamping action for light-duty applications. The 360-degree swivel base featuring (2) lockdowns, adjusts the direction of the jaws for proper placement. Hand-tightening the lock knob on the base secures its position.

The vise has a cast iron body with steel U-channel bar for durability and has a flat portion that acts as an anvil and additional work surface. The hardened steel top jaws can be replaced when worn, and the built-in cast iron pipe jaws are grooved for enhanced grip. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise.

Product Highlights :

  1. Large Anvil Work Surface
  2. 4 Mounting Tabs
  3. Covered Main Screw
  4. Precision Machined Main Scew
  5. Diamond Serrated Machinist Jaws
  6. Cast in place Pipe Jaws
  7. Steel ‘U’ Channel Bar for Increased Durability
  8. Dual Lockdowns
  9. 360 Degree Swivel Base

Package Dimensions : 6 x 8 inches
Item Weight : 17 pounds
Manufacturer : Yost Tools
Date First Available : September 17, 2012

5. TEKTON 4 Inch Swivel Bench Vise .

TEKTON 4 Inch Swivel Bench Vise | 54004
1,237 Reviews
TEKTON 4 Inch Swivel Bench Vise | 54004
  • Includes 1-pc. 120-degree swivel bench vise: 4 in.; Product manual;...
  • Cast iron construction (30,000 PSI tensile strength) with replaceable...
  • 120-degree swivel base with dual lock-down nuts positions workpiece...
  • Three mounting holes anchor vise securely to workbench

Made from 30,000 PSI cast iron, the all-purpose medium duty TEKTON 4 in. Swivel Bench Vise securely holds any workpiece while you thread, fasten, build, bend, shape, or sharpen it.

Whether you are repairing vehicles, metalworking, or assembling parts, you can work better, faster, and safer knowing your workpiece is properly secured. Just lock it in and thread, fasten, build, bend, shape, or sharpen with confidence.

The vise is made from 30,000 PSI cast iron, so durability and dependability are built in. Put your project in the sure grip of the replaceable nonslip serrated steel jaws and it won’t budge.

Product Highlights :

  1. Includes 1-pc. 120-degree swivel bench vise: 4 in.; Product manual; Mounting template .
  2. Cast iron construction (30,000 PSI tensile strength) with replaceable serrated steel jaws holds work with a sure, nonslip grip .
  3. 120-degree swivel base with dual lock-down nuts positions workpiece where you need it
  4. Three mounting holes anchor vise securely to workbench .
  5. Polished steel anvil offers a smooth, consistent work surface for shaping metal pieces .
  6. Acme-threaded screw glides smoothly without binding .
  7. Requires three 3/8-inch diameter bolts (not included) for mounting .

Package Dimensions : 10.6 x 4.8 x 5.6 inches
Item Weight : 14.8 Pounds
Manufacturer : TEKTON
Date First Available : November 1, 2013

6. WEN 453BV 3-Inch Heavy Duty Cast Iron Bench Vise with Swivel Base.

WEN 453BV 3-Inch Heavy Duty Cast Iron Bench Vise...
70 Reviews
WEN 453BV 3-Inch Heavy Duty Cast Iron Bench Vise...
  • 3-inch by 3/4-inch grated jaws open up to 3-1/2 inches wide
  • Swiveling base pivots over 130 degrees
  • Constructed from heavy duty 36, 000 PSI cast iron
  • Over 1850 pounds of clamping force tightly secure your workpiece in...

Remember when your bench had a vise on it? Keep your workpieces secure with the WEN 3-Inch Bench Vise. Our crosscut non-slip 3-inch jaws open up to a spacious 3-1/2 inches, keeping your workpieces perfectly still for sawing, drilling, polishing, grinding, or whatever else you need to get done.

Made from heavy duty powder-coated 36, 000 PSI cast iron, the WEN Bench Vise grips tightly onto your workpieces, providing over 1, 850 pounds of clamping force. The swiveling base pivots over 130 degrees to meet the needs of any project, with three 12 mm mounting holes to attach to the table of your choice.

Onboard 2-3/4 by 2-3/4-inch anvil helps provides metalworkers an aid for forging tools. And because its a WEN product, your bench vise comes backed by a two-year , a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

Product Highlights :

  1. 3-inch by 3/4-inch grated jaws open up to 3-1/2 inches wide
  2. Swiveling base pivots over 130 degrees
  3. Constructed from heavy duty 36, 000 PSI cast iron
  4. Over 1850 pounds of clamping force tightly secure your workpiece in place
  5. Features an onboard 2-3/4 by 2-3/4 inch anvil

Package Dimensions : 11.75 x 12.25 x 5.5 inches
Item Weight : 10.7 pounds
Manufacturer : ‎WEN
Date First Available : November 15, 2018

7. Wilton 550P Multi-Purpose Bench Vise.

Wilton 550P Multi-Purpose Bench Vise, 5-1/2' Jaw...
360 Reviews
Wilton 550P Multi-Purpose Bench Vise, 5-1/2" Jaw...
  • QUICK SETUP: Indexed at 30 degree increments for quick set up
  • STRONG GRIP: Replaceable hardened steel jaws with a serrated pattern...
  • 360 DEGREE ROTATING HEAD: Can clamp material at any angle
  • PERFORMANCE: Has built-in pipe jaws and a V-jaw to easily hold round...

Wilton Tool’s Multi-Purpose Bench Vise is ideal for light tradesman, utility, MRO, and general purpose use.

This vise features a 360-degree rotating head to clamp material at any angle, 30-degree indexing increments for quick set up, built-in pipe jaws, and a V-jaw to easily hold round objects vertically.

The body and movable jaw are 30,000 PSI gray cast iron, and the base is 60,000 PSI ductile iron, providing durability through a wide range of applications.

Product Highlights :

  1. Indexed at 30 degree increments for quick set up.
  2. Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life.
  3. Can clamp material at any angle.
  4. Has built-in pipe jaws and a V-jaw to easily hold round objects vertically.

Package Dimensions : ‎20.9 x 9.8 x 9.4 inches
Item Weight : 40 pounds
Manufacturer : Wilton Tools
Date First Available : July 11, 2019.

8. Wilton 63302 6-Inch Shop Vise .

Wilton 63302 6-Inch Shop Vise
560 Reviews
Wilton 63302 6-Inch Shop Vise
  • DURABILITY: Have castings with a 30,000 PSI gray cast iron body built...
  • SECURE HOLD: Capable of mounting to the bench with 4 mounting posts...
  • 360 DEGREE SWIVEL: Base can swivel 360 degrees with double lockdown...
  • LIFETIME WARRANTY: Product is built to last. Wilton warrants every...

We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.

This durable shop vise has a 25,000 pound casting. The four lug base design and double lock downs make this vise very stable under pressure. Easy gliding U channel. Competitively priced.

Product Highlights :

  1. Have castings with a 30,000 PSI gray cast iron body built for rugged use and extended life.
  2. Capable of mounting to the bench with 4 mounting posts providing more stability and secure hold
  3. Base can swivel 360 degrees with double lockdown for quick and easy positioning
  4. Product is built to last. Wilton warrants every product they sell against manufacturers’ defects.
  5. Has built-in pipe jaws handle various pipe sizes and rubber pinch safety guards.

Package Dimensions : 18 x 8.7 x 9.7 inches
Item Weight : 42 pounds
Manufacturer : JPW Industries Inc.
Date First Available : January 15, 2001

9. Forward DT08125A 5-Inch Heavy Duty Bench Vise .

Forward DT08125A 5-Inch Heavy Duty Bench Vise...
1,215 Reviews
Forward DT08125A 5-Inch Heavy Duty Bench Vise...
  • Jaw width:125mm(5"), Opening: 125mm(5"), Throat Depth: 67mm(2.6"),...
  • More Durable and Sturdy: Material updated, stationary body and...
  • Multifunctional: Mounting vise on the workbench, then you could do the...
  • Great for clamping and fixing workpiece: Higher clamping force; Longer...

Forward 5 inch rotating bench vise is the ideal industry heavy duty vise. It can be used for home craftsman, in the workshop, and even can be outdoor used. It’s completely closed for preventing water, dirt & rust. If the vise can be normally operated, it will be lifetime using.

Forward bench vise features three sets of jaws for gripping parts: Machinist Jaws, built in Pipe Jaws and V-Jaws. Replaceable jaws with microgroove tooth space are made from high strength steel for superior grip.

Forward bench vise offers Self Align Pipe Jaws. These jaws adjust well to the work pieces to provide powerful clamping pressure while reducing marring.

Product Highlights :

  1. Jaw width: 5 inches (12.5cm)
  2. Jaw Opening: 5 inches (12.5cm)
  3. Throat Depth: 2.6 inches (6.7cm)
  4. A large anvil work surface is located
  5. PSI 60,000 ductile iron

Package Dimensions : ‎Forward
Item Weight : ‎35.1 pounds
Manufacturer : ‎18.7 x 10.5 x 10.1 inches
Date First Available : August 7, 2018

10. JCL Vise Jaws Nylon, Multipurpose 4″ .

JCL Vise Jaws - Nylon, Multipurpose 4' - Use on...
5,594 Reviews
JCL Vise Jaws - Nylon, Multipurpose 4" - Use on...
  • Multipurpose Design: These 4" nylon vise jaw pads are designed for you...
  • Extra Compatible: Our nylon vise pads are compatible with a wide...
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from...
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8...

The superior groove design of our magnetic vise jaws, gives you a firm grip on your workpiece, while protecting it from damage.

The flat and grooved sides of these vice jaws are interchangeable, allowing you to grip any flat, round or irregular shaped objects safely and securely.

The JCL vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items in place.

Our vise jaws are made from the highest quality nylon and are designed to secure your workpiece while protecting it from damage.

Each nylon vise jaw set has 8 powerful, rare earth magnets. These magnets are specifically located on the both sides of the jaws to ensure that they will stay firmly in place once attached to your vise.

Our vise jaws are designed to objects of all shapes and sizes. Objects can be clamped at vertically, horizontally and at a 45 degree angle, to suit your every need.

Product Highlights :

  • These 4″ nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our soft vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place.
  • Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories.
  • Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gunsmithing, jewelry making, and more.
  • Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise.

Package Dimensions : 4 x 1 x 1 inches
Item Weight : 3 ounces
Manufacturer : JCL PRODUCTS
Date First Available : January 18, 2016

Leave a Comment